60060 Single Point Load Cell
Sensortronics
Model 60060 is a single-point load cell designed for direct mounting of large platforms.
Rated capacities of 100 to 2000 pounds
Unique shear beam design—aluminum construction
Moment-compensated design for minimal sensitivity to moments induced by off-center loading
Teknik dosyalar
| SKU | Capacity | Material | Cable Length | Accuracy / Class Code | Mounting Thread Type | Output | Approval / Safety Code |
|---|---|---|---|---|---|---|---|
| 60060-001E-NC-01F | Capacity : 1 klb | Material : Stainless Steel | Cable Length : 3 m | Accuracy / Class Code : No Classification | Mounting Thread Type : UN | Output : Standard Product | Approval / Safety Code : FM |
| 60060-500L-NC-04F | Capacity : 500 lb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : NTEP IIIL/10000 Single | Mounting Thread Type : UN | Output : Standard Product | Approval / Safety Code : FM |
| 60060-500K-C3-00X | Capacity : 500 klb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : OIML 3000 d | Mounting Thread Type : Metric | Output : Standard Product | Approval / Safety Code : Not ATEX/FM approved |
| 60060-002E-NC-02F | Capacity : 2 klb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : No Classification | Mounting Thread Type : Unified National | Output : Standard Product | Approval / Safety Code : FM |
| 60060-250K-C3-00F | Capacity : 250 klb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : OIML 3000 d | Mounting Thread Type : Unified National | Output : Standard Product | Approval / Safety Code : FM |
| 60060-300L-NC-01F | Capacity : 300 lb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : No Classification | Mounting Thread Type : Unified National | Output : Standard Product | Approval / Safety Code : FM |
| 60060-250L-A5-04F | Capacity : 250 lb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : NTEP 5000 Multiple | Mounting Thread Type : UN | Output : 2.0 mV/V | Approval / Safety Code : FM |
| 60060-250L-NC-02F | Capacity : 250 lb | Material : Stainless Steel | Cable Length : 3.5 m | Accuracy / Class Code : No Classification | Mounting Thread Type : UN | Output : 2.0 mV/V | Approval / Safety Code : FM |
| 60060-300L-NC-00F | Capacity : 300 lb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : No Classification | Mounting Thread Type : UN | Output : 2.0 mV/V | Approval / Safety Code : FM |
| 60060-150L-NC-00X | Capacity : 150 lb | Material : Aluminum | Cable Length : 3.5 m | Accuracy / Class Code : NTEP 5000 Multiple | Mounting Thread Type : UN | Output : 2.0 mV/V | Approval / Safety Code : Not ATEX/FM approved |
Description
Model 60060 is a single-point load cell designed for direct mounting of large platforms.
The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products.
This high accuracy load cell is approved to OIML R60, NTEP and other stringent approval standards. Suitable for use in hazardous environments, these load cells can be provided with European approval to EEx ia IIC T4 and are FM approved to Class I, II, III, Division I.
A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range.
Two additional sense wires sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires’ resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Features
- Rated capacities of 100 to 2000 pounds
- Unique shear beam design—aluminum construction
- Moment-compensated design for minimal sensitivity to moments induced by off-center loading
- Ideal for situations exceeding the capabilities of similar “brick” design load cells
- Trade certified for NTEP Class III:5000 divisions; Class IIIL:10000 divisions and OIML R60 3000 divisions
- Sensorgage™ sealed to IP67 standards
- Factory Mutual System Approved for Classes I, II, III; Divisions 1 and 2; Groups A through G.
- Non-incendive ratings (without barriers)
- Available in stainless steel
Certifications
| Parameter | Value | Unit | ||
|---|---|---|---|---|
| Rated capacity (lbs) | 100, 250, 500, 750, 1K, 2K | lbs | ||
| NTEP/oiml accuracy class | NTEPIIIL | Standard | OIML R60* | |
| Max. no. of intervals (n) | 10,000 multiple | — | 3000 | |
| Rated output R.O | 2 | mV/V | ||
| Rated output tolerance | ±10 | ±%mV/V | ||
| Zero balance | 1 | ±%FSO | ||
| Non-repeatability | 0.010 | 0.015 | 0.010 | ±%FSO |
| Creep error | 0.03 | 0.05 | 0.017 | ±%FSO |
| Ultimate over load | 300 | % of R.C | ||
| Excitation voltage | 10 | VDC or VAC RMS | ||
| Max. excitation voltage | 15 | VDC or VAC RMS | ||
| Input resistance | 400 nominal –20/+0 | Ω | ||
| Output resistance | 350 –1/+5 | Ω | ||
| Insulation resistance | >1000 | MΩ | ||
| Environmental protection | IP67 | |||
- FSO - Full Scale Output
- All specifications subjects to change whithout notice.
Applications
- Single-point platform scales
- Belt conveyor scales
- Bench and counting scales
- Checkweighing scales
- Hopper scales and netweighing
Üreticinin özgün İngilizce teknik içerikleri korunmuştur. Teknik PDF belgeleri ürün sayfalarından indirilebilir.