1015 Single Point Load Cell
Tedea-Huntleigh
Model 1015 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms.
Capacities: 3–90 kg
Aluminum construction
Single-point 400 x 400 mm platform
Teknik dosyalar
| SKU | Capacity | Cable Length | Accuracy / Class Code | Mounting Thread Type | Output | Approval / Safety Code |
|---|---|---|---|---|---|---|
| 01015-090K-F0-00X | Capacity : 90 kg | Cable Length : 1 m | Accuracy / Class Code : Not OIML Approved 2000d | Mounting Thread Type : Metric | Output : Standard Product | Approval / Safety Code : Not ATEX/FM approved |
| 01015-010K-G0-54X | Capacity : 10 kg | Cable Length : 3 m | Accuracy / Class Code : Not OIML Approved 3000d | Mounting Thread Type : UN | Output : 2.0 mV/V | Approval / Safety Code : Not ATEX/FM approved |
| 01015-050K-G0-51X | Capacity : 50 kg | Cable Length : 1.1 m | Accuracy / Class Code : Not OIML Approved 3000d | Mounting Thread Type : UN | Output : Standard Product | Approval / Safety Code : Not ATEX/FM approved |
| 01015-003K-3S-59F | Capacity : 5 kg | Cable Length : 3 m | Accuracy / Class Code : NTEP 5000 Single | Mounting Thread Type : Metric | Output : Standard Product | Approval / Safety Code : Not ATEX/FM approved |
| 01015-020K-D5-55F | Capacity : 5 kg | Cable Length : 3 m | Accuracy / Class Code : NTEP 5000 Single | Mounting Thread Type : MT | Output : 2.0 mV/V | Approval / Safety Code : FM |
| 01015-050K-D5-01X | Capacity : 50 kg | Cable Length : 5 m | Accuracy / Class Code : NTEP 5000 Single | Mounting Thread Type : NA | Output : 2.0 mV/V | Approval / Safety Code : Not ATEX/FM approved |
Description
Model 1015 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms.
Its use in large platforms, combined with its high accuracy and low cost, makes this load cell ideally suited for a large range of weighing applications, including bench scales and counting scales.
A special humidity resistant protective coating is available which ensures long-term reliability.
Model 1015’s built-in overload stop can provide mechanical protection against overloading.
The two additional sense wires feedback the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension is achieved by feeding this voltage into the appropriate electronics.
Features
- Capacities: 3–90 kg
- Aluminum construction
- Single-point 400 x 400 mm platform
- NTEP approved (not applicable for 3 and 90 kg)
- IP65 protection
- Available with metric and UNC threads
Options
- FM approval available
- IP67 available
Certifications
| Parameter | Value | Unit | |
|---|---|---|---|
| Rated capacity (kg) | 3, 5, 7, 10, 15, 20, 30, 50, 90 | kg | |
| NTEP/oiml accuracy class | NTEP | Non-Approved | |
| Max. no. of intervals (n) | 5000 single | 3000 | |
| Rated output R.O | 2 | mV/V | |
| Rated output tolerance | 0.2 | ±%mV/V | |
| Zero balance | 0.2 | ±%FSO | |
| Ultimate over load | 300 | % of R.C | |
| Excitation voltage | 10 | VDC or VAC RMS | |
| Max. excitation voltage | 15 | VDC or VAC RMS | |
| Input resistance | 415±15 | Ω | |
| Output resistance | 350±3 | Ω | |
| Insulation resistance | >5000 | MΩ | |
| Environmental protection | IP65 | ||
- FSO - Full Scale Output
- All specifications subjects to change whithout notice.
Applications
- Bench scales
- Counting scales
- Grocery scales
Üreticinin özgün İngilizce teknik içerikleri korunmuştur. Teknik PDF belgeleri ürün sayfalarından indirilebilir.