1130 Stainless Steel Single-Point Load Cell
Tedea-Huntleigh
The Model 1130 is a low-profile stainless steel single point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in demanding environments.
Capacities 7–100 kg
Stainless steel construction
Single-point 400 × 400 mm platform
Teknik dosyalar
| SKU | Capacity | Cable Length | Accuracy / Class Code | Mounting Thread Type | Output |
|---|---|---|---|---|---|
| 01130-015K-C3-05X | Capacity : 15 kg | Cable Length : 10 ft | Accuracy / Class Code : OIML 3000 d | Mounting Thread Type : MT | Output : Standard Product |
| 01130-010K-C3-04X | Capacity : 10 kg | Cable Length : 3 m | Accuracy / Class Code : OIML 3000 d | Mounting Thread Type : MT | Output : Standard Product |
| 01130-007K-C3-04X | Capacity : 7 kg | Cable Length : 3 m | Accuracy / Class Code : Not OIML 3000 d C3MR10 | Mounting Thread Type : MT | Output : 2.0 mV/V |
| 01130-030K-C3-03X | Capacity : 30 kg | Cable Length : 3.15 m | Accuracy / Class Code : OIML 3000 d | Mounting Thread Type : UN | Output : 2.0 mV/V |
Description
The Model 1130 is a low-profile stainless steel single point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in demanding environments.
The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range.
Constructed in stainless steel, this high accuracy load cell is approved to stringent approval standards, e.g., OIML and NTEP.
The two additional sense wires feed-back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Features
- Capacities 7–100 kg
- Stainless steel construction
- Single-point 400 × 400 mm platform
- OIML R60 and NTEP approved
- IP66 protection
- Available with metric and UNC threads
Options
- ATEX, FM and IECEx approvals available
Certifications
| Parameter | Value | Unit |
|---|---|---|
| Rated capacity (kg) | 7, 10, 15, 20, 30, 50, 75, 100 | kg |
| NTEP/oiml accuracy class | NTEP | Non-Approved | C3 | |
| Max. no. of intervals (n) | 4000 single | 1000 | 3000 | |
| Rated output R.O | 2.0 | mV/V |
| Rated output tolerance | 0.2 | ±%mV/V |
| Zero balance | 0.2 | ±%FSO |
| Creep error | 0.0015 | 0.0500 | 0.0200 | ±%FSO |
| Temp. effect on sensitivity | 0.0030 | 0.0100 | 0.0023 | ±%FSO/F |
| Temp. effect on min dead load output | 0.0008 | 0.0030 | 0.0010 | ±%FSO/F |
| Ultimate over load | 300 | % of R.C |
| Excitation voltage | 10 | VDC or VAC RMS |
| Max. excitation voltage | 15 | VDC or VAC RMS |
| Input resistance | 385±15 | Ω |
| Output resistance | 350±3 | Ω |
| Insulation resistance | >2000 | MΩ |
| Environmental protection | IP66 |
- FSO - Full Scale Output
- All specifications subjects to change whithout notice.
Application
- Demanding environment small platforms
- Demanding environment check weighing
Üreticinin özgün İngilizce teknik içerikleri korunmuştur. Teknik PDF belgeleri ürün sayfalarından indirilebilir.